Magnetic Levitating Light Bulb

Inside the wooden base, there are two things, you will find that there is an array of electromagnets and a magnetic induction charger.

When lowering the bulb onto the block, the outermost electromagnets serve to attract the bulb’s base while the inner magnets create a repelling force. This is what holds the bulb in place and causes it to hover a few centimeters above the block.

Now once within the range of the bulb’s base, the receiver is able to pick up power from the charger block via magnetic induction.

Easy to Set Up

Our levitating bulb can be set up in minutes by simply connecting the power supply, attaching the co-pilot atop the base, and lowering the bulb slowly over the center until it hovers in place.

Getting your light bulb to float for the first time will take a lot of patience and practice at first. If this is your first time using magnetic levitation products, you may need to attempt a few times first before succeeding. However, once you succeed once, it only gets easier and easier!

STEP 1:

Place the base on a flat, non-ferrous surface and turn on the power by connecting the cable to the base and plugging the adapter into your outlet.

STEP 2:

Hold the light bulb with both hands. Start from the center of the base and 10cm above the base, and slowly go down until you are about 2cm above the base. You will feel an upward repulsion force on the base.

STEP 3:

Once you feel that the bulb is almost balanced in mid-air (not falling down or being pushed up), slowly loosen your grip. If the light bulb ends up being sucked to the base, pick up the light bulb and restart from step 2 again. Otherwise, great job, you got it to levitate!